Main Features:
Specialized Motherboard with *2Bits
MCU
It could preprocess *2 instructions, support baud rate as high as
*****0, more powerful!
The Most Advanced *2Bits Laser Engraver Firmware
Ortur laser master firmware, smarter, faster,
higher precision and easier to use.
Laser power range could be S0 - S***0, compared to 8bits desktop
laser engravers, which only has S0 - S**5, Ortur Laser Master could
control laser beam more accurately, could even use the high power
laser unit to "draw" a picture on paper , that the 8bits high power
laser engravers could not do.
Engraving speed could be as high as ***0MM/Min. ( If do not
consider the laser carving result, the velocity of movement could
be as high as ***0MM/S )
Active Position
Protection
There is a G-sensor on the motherboard, if the machine detects
unauthorized movement, the laser beam will stop.
Laser Beam Safety
Guard
If your computer system halted or USB cable disconnected, led to
that the laser engraver stops moving, the laser beam will stop to
prevent fire.
Exposure Duration Detection and
Limitation
If laser engraver is under control, but users forget to operate and
keep the laser beam working, extra safety will cut off in case the
motor stopped moving, to prevent fire.
LaserGRBL ( free software ) supports Windows XP, 7, 8, *0.
LaserGRBL is the most popular carving software in the world, could
import different format images, you could editing in PhotoShop,
Inkscape, CAD, etc. and then connect to the engraver via
laser
LightBurn ( Not free software, lightburnsoftware.com ) supports
Windows, Mac OS, and Linux. It's the most popular paid carving
software in the world, very easy to use.
This laser engraver supports PWM mode.
Pre-assembled parts, just need *0 - *0 minutes to install the
machine.
**0 x **0 mm large engraving area.
Aluminum profile frame + structured cabling, solid structure,
smooth operation, attractive appearance
Synchronizing shaft mechanical structure, avoid out-sync on two Y
rails, during full speed engraving.
Specification:
Motherboard: *2 bits motherboard
Firmware: Ortur Laser Master Firmware
OS of Upper Computer: Windows ( Working with LaserGRBL ), MAC OS
and Linux ( Working with LightBurn )
Power of Laser Engraver: *6W, *2V 3A
Electrical Power of Laser Module: 7W, *5W, *0W
Wave Length: **5 ± 5nm
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Carving Area: X: **0MM x Y: **0MM
Carving Speed: ***0MM / Min and less
Image size: No Limit ( The pixel accuracy could be adjusted freely,
and the default is **0 pixels per inch, it's about
0.*1um
pixel precision )